Roof Coatings for Storm Restoration

Commercial Roof Coatings for Storm Damage Repair

What can commercial roof coatings do for storm restoration?

Commercial roof coatings offer a way to repair and restore many types of commercial roofs after storm damage without needing a full roof replacement. They seal leaks, protect the roof surface, and can extend the life of a roof that might otherwise be torn off.

Leaks or visible damage after a storm

After a storm with high winds, heavy rain, or hail, you might notice water spots on your ceiling, active leaks, or see obvious damage to your roof like punctures, tears, or exposed areas. The roof might look worn down or have missing pieces.

Water damage and accelerated roof failure

When a storm hits, it can compromise your roof's waterproofing layer. Even small punctures or cracks let water get in. This water then seeps into your insulation and structural deck. Wet insulation loses its R-value, meaning your building's energy efficiency drops and heating/cooling costs go up. If water sits on the deck for too long, it can lead to rot, mold, or structural damage, which are much more expensive problems to fix down the road. Ignoring storm damage usually leads to more widespread damage and a shorter lifespan for your roof, often forcing an expensive tear-off and replacement sooner than necessary.

Restoring storm-damaged roofs with coatings

Many commercial roofs damaged by storms can be restored with a Conklin-trained roof coating system, instead of being replaced. This approach saves you money and avoids the disruption of a full tear-off. Here's how we typically handle a storm-damaged roof: 1. Inspection: First, a Conklin-trained contractor will come out to your building to perform a thorough commercial roof inspection. We'll check the entire roof surface for punctures, tears, seam separations, and areas where water might be getting in. We'll also check the underlying insulation and deck for moisture. If the insulation is waterlogged in more than 25% of the area, or if the roof deck is severely compromised, a coating system might not be the best solution. We'll be honest about what your roof needs. 2. Minor Repairs: We'll make necessary spot repairs to the existing roof. This might involve patching punctures, addressing torn seams, or replacing small sections of insulation that are wet, if suitable. 3. Cleaning: The roof surface is thoroughly cleaned to remove dirt, debris, and any loose material. This ensures proper adhesion for the coating. 4. Priming (if needed): Depending on the existing roof material, a primer might be applied to help the coating stick better. 5. Reinforcing Seams: All seams, penetrations (like pipes and vents), and transition areas are reinforced with a base coat and fabric, creating a seamless, watertight seal. This is crucial for stopping leaks where they often start. 6. Coating Application: Once the roof is prepped, we apply one or more layers of our acrylic coating system. These coatings form a durable, monolithic (seamless) membrane that reflects UV rays, resists new hail damage, and protects against future weather.

• For metal roofs, the coatings seal rust and stop leaks at fasteners and seams.
• For flat roofs like EPDM or TPO, the coatings restore their flexibility and reflectivity, preventing further deterioration.

7. Final Inspection: After the coating cures, we perform a final inspection to ensure the entire system is applied correctly and provides full protection. This process transforms a storm-damaged roof into a watertight, energy-efficient surface, often extending its life for many years. It's important to remember that not every roof is a candidate for restoration. If the structural integrity is too far gone or the insulation is too saturated, a tear-off might be unavoidable. Our goal is to assess your roof honestly and provide the most effective solution.

Frequently Asked Questions

Can a roof coating fix active leaks from storm damage?

Yes, a properly applied commercial roof coating system is designed to stop active leaks. We first address specific leak points and compromised areas with patches and seam reinforcement, then apply a continuous membrane that seals the entire roof surface, preventing water entry.

How long does a coated roof last after storm restoration?

A Conklin-trained coating system, when applied correctly to a suitable substrate, can add 10 to 20 years or more to your roof's life. This extended lifespan also comes with warranty options, giving you peace of mind that your investment is protected against future weather.

Will a roof coating help with energy costs after a storm?

Absolutely. Our acrylic coatings are highly reflective, meaning they bounce a lot of the sun's heat away from your building. This reduces the heat absorbed by your roof, which in turn lowers your building's internal temperature and can lead to significant savings on your air conditioning bills, especially during hot weather. Don't let storm damage escalate into a costly problem. If your commercial roof has been hit by a storm and is showing signs of damage, reach out to White Roofing Systems. Our Conklin-trained contractors are ready to inspect your roof and discuss whether a coating system is the right solution for you. Call us directly at or visit our contact page to schedule an inspection. We serve building owners and facility managers across the U.S.